Views: 0 Author: Site Editor Publish Time: 2022-04-04 Origin: Site
If there are no metal impurities, the raw material will flow directly to the lower discharge port through the plastic metal nickel alloy separator of the special injection molding machine model. If the detector detects metal in the raw material, then the controller immediately activates the nickel alloy separator plate to direct the metal objects together with part of the raw material to the side-discharge port, and then the manifold quickly returns to its normal position. Next, we introduce you to the nickel alloy separator.
Here is the content list:
l What kind of harm can metal impurities cause to the machine and production?
l What are the safety matters that need to be noted in the use of the Nickel alloy separator?
l How are Nickel alloy separators classified?
1. Often clog the nozzle of the nickel alloy separator;
2. Damage the screw of the nickel alloy separator for no reason;
3. Scratch the cylinder of the plastic machine;
4. Scratch the finished product and leave traces;
5. Clogging the mold injection port of the nickel alloy separator;
6. Increase the pressure of the hot runner, blocking the flow;
7. Scratch the mirror surface of the mold;
8.Touch the precision mold;
9. Interspersed in the middle of the finished product, resulting in unqualified products.
The nickel alloy separator is designed for the free fall of small masses of material (such as powder or granular) in the vertical pipeline, the import should be connected to the feed hopper or pipeline. This equipment should avoid being surrounded by steam, dust, or similar substances, as this may affect the insulation of the PVC wire.
There is a mains power supply connected to the MSG3.3 electrical box, which is connected to the external AC power, so there is a hazard warning posted inside the door of the electrical box. When the power is on and the air supply is connected, it is very dangerous to open the cover of the machine, so a hazard warning is required inside the nickel alloy separator.
3.Danger may occur in places where there is no danger warning.
In places where there is no hazard warning, there is a possibility of injury to hands from static electricity or pneumatic components.
4.Safety precautions for operation and maintenance
When the nickel alloy separator is working, the case cover and the electric box door should be closed to avoid the danger of injury and contamination of the machine and to prolong the service life. All warning signs affixed to this machine must be clear and visible, and cannot be torn off for any reason. The inlet and outlet should be connected by a 70mm diameter tube, and the outlet tube should be at least 90cm long. If you carry out maintenance of electrical and electronic components or pneumatic components, be sure to cut off the power and gas source.
Nickel alloy separators are usually divided into channel type, drop type, and pipe type by the way they detected items are transported. At present, the channel-type nickel alloy separator is the most common metal detection equipment on the market. The detector channel is square, generally with a conveyor belt mechanism, with an automatic rejection device, or to provide alarm signals. The goods on the conveyor belt passing through the detector When the items on the conveyor belt pass through the detector, they are automatically rejected, or the conveyor is stopped once there is metal. It is mainly used for in-line inspection of finished and semi-finished products and provides final inspection before shipment.
The entire range of high-quality nickel alloy separators offered by us is guaranteed to surpass the quality. Nanjing Suntech Metal Equipment Co., Ltd. can get the designs that include the finest quality international and national standards through high durability and perfection from the most reliable experts in the market.